USF Mitigation Measures Questions

plz check the due of each task

task 1: (due in 4 hours or as soon as u finish )

fill the below sections 1,2,3 from the project i provided in the attatchment

1. project risks

This is the same as what you have captured in the PDR chart set. Provide details regarding to how you will mitigate the risks that you have identified

2. standards

The purpose of this section is to identify, if you are using any standard in your project. For example, if you are using Bluetooth, then there is:

• –https://en.wikipedia.org/wiki/IEEE_802.15
• –https://standards.ieee.org/standard/802_15_1-2002.html
• –https://standards.ieee.org/standard/802_15_1-2002.html

If you are using USB 3.0 in your project, then identity the standard:

The intention is that you identify any standard system or interface you are using in your project. As well as identifying potential change that could improve it.

3. Engineering Ethical Responsibility

If tomorrow your idea turns into a product and is sold to the market. Then, please describe how your design will impact the environment. For example, have you made effort to reduce the use of lead? have you made effort to understand how your product will be disposed of, once it is not in use. For example, you remember all the old tube TV are now trash, which are too heavy to pick and are dangerous

If your idea is in use for safety critical system, have done any single point failure analysis, i.e., FMEA etc.

task 2:(due all time of the assignment )

Please share with the class a YouTube video link, that highlights an application using COMPENSATION )PID, lead and/or lag, other) to improve the transient response (KPIs) or the steady-state error of the particular system.

In 20 – 30 word each Q explain:

a) the “WHY” compensation is important for the system you have selected and

b) the “HOW” it works.

c) What KPI was improved using the described compensation technique